Sgraffito Flower Plate


Products Used

  • MB-103 Rimmed Salad Plate
  • SC-34 Down To Earth, SC-75 Orange A Peel, SC-27 Sour Apple, SC-26 Green Thumb, SC-16 Cotton Tail, SC-31 The Blues, SC-76 Cara ein Blue, SC-6 Sunkissed

Decorating Accessories

  • BT-910 Synthetic Sponge, CB-106 #6 Script Liner, CB-110 #10/0 Mini Liner, CB-604 #4 Soft Fan

Miscellaneous Accessories

  •  Sgraffito Tool, pencil




scragfitto Flower Plate
Designer: Marcia Roullard


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using CB-604 #4 Soft Fan, brush 2-3 coats of SC-34 Down To Earth to the plate. This color must be dry before proceeding.
  3. Pencil in 2 circles for the flowers and smaller circles for the centers. Also pencil in the stem and leaves.
  4. Using CB-106 #6 Script Liner, brush the outer circle shape for the petals with 1 coat of SC-16 Cotton Tail, this will help the SC-6 Sunkissed color show up. Brush over the Cotton Tail with 2 coats of SC-6 Sunkissed, use in a "press and lift" motion for the petals.
  5. Using CB-106 #6 Script Liner, brush 2 coats of SC-75 Orange A Peel to the center of the flowers.
  6. Using CB-106 #6 Script Liner, brush the stem and leaf with 1 coat of SC-27 Sour Apple and 1 coat of SC-26 Green Thumb.
  7. While these colors are damp, use the scraffito tool to outline the petals, and to make circles in the orange centers, also small lines at the base of the petals.
  8. Using CB-604 #4 Soft Fan, brush the background with SC-31 The Blues and SC-76 Cara bein Blue to the top half of the plate and SC-27 Sour Apple and SC-6 Sunkissed to the lower half, 2 coats.
  9. While the color is damp use the scraffito tool to draw in circles in different sizes, touching each other.
  10. With the opposite end of the brush, dot the centers of the flowers with SC-34 Down to Earth and SC-6 Sunkissed around the edges.
  11. Using CB-110 #10/0 Mini Liner, brush SC-34 Down to Earth around the petals, for more definition.
  12. Using CB-604 #4 Soft Fan, brush 3 coats of SC-76 Cara bein Blue to the back of the plate.
  13. Once plate is fully dry, using CB-604 #4 Soft Fan, brush the top of the plate with 1 coat of S-2101 Crystal Clear Brushing or dip in clear.
  14. Stilt and fire to cone 06.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects