Marbled Fox


Products Used

  • MB-1491 Faceted Fox
  • SC-15 Tuxedo
  • SC-16 Cotton Tail
  • SC-75 Orange-A-Peel
  • SG-401 Black Designer Liner
  • NT-CLR Clear Dipping or S-2101 Clear Brushing Glaze

Decorating Accessories

  • CB-110 #10/0 Liner
  • CB-106 #6 Script Liner
  • CB-604 #4 Soft Fan

Miscellaneous Accessories

  • Blue Shop Paper Towel
  • 2" Foam Roller


IMG 6333lr
Designer: Marcia Roullard



1. Begin with a properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove dust.

2. Wet a blue shop towel, squeeze out the excess water and lay flat on a surface. Squeeze SC-16 Cotton Tail in wavy lines on the paper; fill in with a few SC-75 Orange-A-Peel. Fold the paper towel in half then unfold. Take another damp shop towel and place it over the glaze from the first towel to pick up the paint.

3. Lay the towel with the glaze over the body of the fox, roll over the top of the paper towel with a foam roller or pat with a dry sponge to transfer the color to the bisque.

4. Remove the paper towel and use a dry foam roller to roll over the color to remove the top layer of color.

5. Repeat to finish the rest of the fox. Let dry.

6. Outline the facets with SG-401 Black Designer Liner. Use the Script Liner to apply two coats of SC-15 Tuxedo to the legs and nose.

7. Use the Liner with Tuxedo to outline the eye and paint the pupil.

8. Dip into NT-CLR or use the Soft Fan to apply two coats of S-2101 Clear.

9. Fire to cone 05/06. 

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects