Olive to Drink!

Your after-hours cocktail just got more festive with this olive inspired martini glass created with Stroke & Coat.

Products Used

  • MB-1215 - Beaded Martini Glass
  • SC-15 - Tuxedo
  • SC-39 - Army Surplus
  • SC-63 - Popeye's Favorite
  • SC-74 - Hot Tamale
  • SP-241 - Speckled Brown Cow
Decorating Accessories
  • BT-910 - Synthetic Sponges
  • CB-106 - #6 Script Liner
  • CB-110 - #10/0 Liner
  • CB-604 - #4 Soft Fan
  • S-2101 - Crystal Clear Brushing
Additional Materials
  • Pencil
Project Info


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. With a pencil, sketch on an olive design on the martini glass. Refer to photo for design placement.
  3. Thin SP-241 Speckled Brown Cow like water.
  4. Using a CB-604 #4 Soft Fan, swirl the thinned color on the top of the martini glass, inside and out. Brush the base with the thinned color.
  5. Thin SC-63 Popeye's Favorite like water and give the top of the glass a few swirls.
  6. Using a CB-106 #6 Script Liner, apply 2 coats of SC-39 Army Surplus to the olives, shade one side and bottom with SC-63 Popeye's Favorite.
  7. Apply 2 coats of SC-39 Army surplus on the balls of the stem. Glaze the rings with 1 coat of SC-15 Tuxedo.
  8. Using a CB-110 #10/0 Liner, outline the olives on the glass with SC-15 Tuxedo and paint in the swizzle stick.
  9. Apply 1 coat of SC-74 Hot Tamale on the pimento.
  10. Pencil in the recipe on the base - Dirty Martini: 3 oz. Vodka, 1 oz. Dry Vermouth, ½ oz Olive Brine, Olive Garnish.
  11. Using a CB-110 #10/0 Liner, apply 1 coat to the recipe. Allow to dry.
  12. Apply clear glaze of choice.
  13. Stilt and fire to shelf cone 06.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects