Cascading Latte Cup

Elements and Pottery Cascades interact to create a very "pottery-looking" latte cup.



Products Used

Bisque
  • MB-122 - Venti Latte Cup
Color
  • FN-009 - Black
  • EL-107 - Amber Ash
  • EL-115 - Iron Moss
  • EL-120 - Black Ice
  • PC-602 - White Cascade
  • SC-15 - Tuxedo
Decorating Accessories
  • CB-604 - #4 Soft Fan
  • BT-910 - Synthetic Sponges
MB122_Element_mug
Additional Materials
Project Info

Instructions


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Thin slightly FN-009 - Black and roll the inside of the mug with the glaze. Pour out excess glaze and leave upside down to drain. Wipe off any drips of glaze on the outside of the mug with a damp sponge.
  3. Using a CB-604 #4 Soft Fan, apply 1 coat of EL-107 Amber Ash to the outside of the mug.
  4. Using a CB-604 #4 Soft Fan, apply 1 coat of EL-120 Black Ice to the top section of the mug.
  5. 5. Using a CB-604 #4 Soft Fan, apply 1 coat of EL-107 Amber Ash to the entire outside of the mug.
  6. Using a CB-604 #4 Soft Fan, apply 1 coat of EL-115 Iron Moss to the lower portion of the mug and the handle.
  7. Using a CB-604 #4 Soft Fan, apply 1 coat of PC-602 White Cascade to the area glazed with the EL-115 Iron Moss, receding from the bottom about 1".
  8. Using CB-604 #4 Soft Fan, splatter the piece with SC-15 Tuxedo. Allow to dry.
  9. Stilt and fire to shelf cone 06.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects