Stenciling with Sculpting Medium


Products Used

  • DT-661 6" Bisque Tile
  • SG-501 Sculpting Medium
  • EL-134 Mirror Blue
  • EL-136 Lapis Lagoon
  • CG-976 Teal Drops
Decorating Accessories
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponges
Additional Materials
  • Pencil
  • Fleur De Lis Stencil
  • Stencil Adhesive
  • Rubber Squeegee
Project Info
  • Designer: Marcia Roullard
  • Skill Level: Basic
  • Time: 1½ hours


  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Spray the back of the stencil with stencil adhesive.
  3. Place on the tile.
  4. Use a Rubber Squeegee to apply 1 coat of SG-501 Sculpture Medium, remove the stencil.  Allow to dry.
  5. Using a CB-604 #4 Soft Fan, apply 1 coat of CG-976 Teal Drops to the background, not important to be exact.
  6. Using a CB-604 #4 Soft Fan, apply 2 coats of EL-136 Lapis Lagoon to the entire tile.
  7. Using a CB-604 #4 Soft Fan, apply 1 coat of EL-134 Mirror Blue, to the tile.
  8. When it begins to dry, with a wet brush scrub back some of the Mirror Blue from the raised design. Allow to dry.
  9. Stilt and fire to shelf cone 06/05.


Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects