Cobbled Trees

 

 
 
Products Used

Bisque
  • MB-889 8" Asian Flair Square Plate
Color
  • SC-88 Tu Tu Tango
  • FN-009 Black
  • SG-202 White Cobblestone
Decorating Accessories
  • CB-106 #6 Script Liner
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponges
red_cobblestone_trees
 
 
Additional Materials
  • Tree Stencil (TCW251S Branches Reversed - www.thecraftersworkshop.com) - Hobby Lobby
  • Stencil Adhesive
 
Project Info
  • Designer: Marcia Roullard
  • Skill Level: Basic
  • Time: 1½ hours
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 2-3 Coats of FN-009 Black to the plate.
  3. Spray the back of the stencil with stencil adhesive, follow directions on the can.  You may need more than one coat.
  4. Plate needs to be dry so the adhesive will work. Set the stencil on the plate, press down the edges.
  5. Using a CB-106 #6 Script Liner, apply 2 coats of SG-202 White Cobblestone to the tree stencil area. Wait for the first coat to lose its shine before applying the next coat.
  6. When the last coat looses its shine, apply 1 coat of SC-88 Tu Tu Tango over the SG-202 White Cobblestone, with a CB-106 #6 Script Liner.
  7. Remove the stencil by pulling it straight up.  If any of the SG-202 White Cobblestone has leaked underneath the stencil, brush over with a couple of coats of FN-009 Black.
  8. Stilt and fire to shelf cone 06/05.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers

Distributors

PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

info@maycocolors.com

Technical Support

614-675-2031

technical@maycocolors.com