Mountain Moose


Products Used

  • MB-1117 Casualware Charge Plate
  • SC-15 Tuxedo
  • SC-26 Green Thumb
  • SC-31 The Blues
  • SC-36 Irish Luck
  • SC-52 Toad-ily Green
  • SC-76 Cara-bein Blue
  • FN-009 Black
  • S-2101 Crystal Clear Brushing or Clear Glaze of Choice
Decorating Accessories
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponge
  • AC-310 Silk Screen Medium
  • DSS-101 Designer Silkscreen - Woodland
Mountain Moose
Additional Materials
  • Pencil
  • Craft Knife
  • Card Stock
  • Newspaper
  • Download Project Pattern: Trees
Project Info
  • Designer: Tim McPherson
  • Skill Level: Basic
  • Time: 2 hours


  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using the BT-910 Synthetic Sponge, pounce to the upper ¼ of the plate SC-31 The Blues. Add a 2nd coat and add some SC-76 Cara-bein Blue.
  3. Tear long pieces of newspaper to resemble mountains. Holding the paper from the sky area downwards, pounce on 2 to 3 coats of SC-53 Toad-ily Green using the BT-910 Synthetic Sponge.
  4. Lay down the next piece of paper, and pounce on 3 coats of SC-26 Green Thumb using the BT-910 Synthetic Sponge.
  5. Lay down the next piece of paper, and pounce on 3 coats of SC-36 Irish Luck using the BT-910 Synthetic Sponge.
  6. Tear a smoother piece of newspaper and hold at the base of the mountains, and sponge on all 3 greens, SC-52 Toad-ily Green, SC-26 Green Thumb and SC-36 Irish Luck, to the grass area.
  7. Cut out a pine tree from card stock, and holding it in place, sponge on 2 coats of SC-15 Tuxedo using the BT-910 Synthetic Sponge.
  8. Place some SC-15 Tuxedo on a palette or tile and sprinkle with AC-310 Silkscreen Medium. Using a palette knife mix color and medium to the consistency of thick peanut butter. If the mix is to thin add more AC-310 Silkscreen Medium or if too thick add more Stroke & Coat.  Too thin of a mixture will bleed under the screen and give you a blurred image. Too thick a mixture will make it hard for the product to penetrate through the holes in the screen and give you blank areas in your screen.  You can also use SG-401 Black Designer liner for more color saturation.
  9. Position the Moose screen from the DSS-101 Designer Silkscreen – Woodland Animals - on the pice. Hold in place, starting from the center out, rub the mixture on the screen with your finger.  Lift a corner up to check if you are applying enough color.  Remove the screen and wash with water.  Do not let the color dry in the screen. This will cause damage to the screen
  10. How to use AC-310 Silkscreen Medium Video Link
  11. Using a CB-604 # 4 Soft Fan, apply 2 coats of FN-009 Black to the back of the plate. Allow to dry.
  12. Using the CB-604 #4 Soft Fan, apply 1 coat of S-2101 Crystal Clear Brushing to the top of the plate or apply clear glaze of choice. Allow to dry.
  13. Stilt and fire to shelf cone 06/05.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support