Autumnal Feather

 

 
 
Products Used

Bisque
  • MB-1365 Feather Tray
Color
  • SC-5 Tiger Tail
  • SC-24 Dandelion
  • SC-34 Down To Earth
  • SC75 Orange-A-Peel
  • SC-94 Curry Around
  • S-2101 Crystal Clear Brushing
Decorating Accessories
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponges
Autum_Feather
 
Project Info
 

Instructions

 

 

  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Thin slightly SC 34 Down to Earth with some water. Use wash with a CB-604 #4 Soft Fan brush over the whole piece. Once this is dry wipe off the top with a damp sponge leaving the wash in the grooves of the bisque. It may be necessary to repeat this step over until the desired look is achieved. Allow to dry.
  3. Place small portions of SC-24 Dandelion, SC-75 Orange-A-Peel, SC-5 Tiger Tail, and SC-94 Curry Around on a palette.
  4. Using a CB-604 #4 Soft Fan, start layering sections of color starting at the spine of the feather moving toward the end. Do this for 2 coats.
  5. On the back of the piece over lap the same colors used on the front following the shape of the feather. Allow to dry.
  6. Using a CB-604 #4 Soft Fan, apply 1-2 coat of S-2101 Crystal Clear Brushing to the piece. Allow to dry.
  7. Stilt and fire to shelf cone 06/05.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers

Distributors

PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

info@maycocolors.com

Technical Support

614-675-2031

technical@maycocolors.com