Toilet Paper Roll Vase

 

tolietpaperroll vase

Products Used

Bisque
  • MB-1467 Faceted Vase

Color
  • SC-15 Tuxedo
  • SC-29 Blue Grass
  • SC-75 Orange-A-Peel
  • SC-97 Cant-elope
  • FN-001 White
  • FN-009 Black

Decorating Accessories

  • RB-144 #4 Soft Fan
  • AC-220 Detailer Bottles

Miscellaneous Accessories

  • Toilet Paper Tube
  • Alcohol
  • 1/4" Tape
  • 1/8" Tape 

 

Designer: Marcia Roullard
 
 

Instructions

1. Begin with properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove any dust.

2. Slightly thin FN-009 Black, pour inside of the vase and roll to coat the inside. Pour out the excess glaze and drain.

3. Fill the AC-220 Detailer Bottles with a mixture of glaze, water, and alcohol. Put each of the following colors in separate bottles: SC-29 Blue Grass, SC-75 Orange-A-Peel and SC-97 Cant-elope. To each color add approximately 1" of glaze, 1/4" of water and 1/2" of alcohol. Mix with a stiff brush and shake well. 

4. Use the Soft Fan to apply two coats of FN-001 White to the outside of the vase.  While the second coat is wet, squirt on the three alcohol mixed colors in squiggle lines. The glaze will spread so leave room for that and leave a lot of white glaze showing. Let dry.

5. Use the 1/4" tape to mask off every other faceted shape.

6. Cut a toilet paper cardboard tube in half. Cut the long end with snips approximately 1 1/2" long so it looks like fringe. Bend the cut edge to create a right angle. Sponge SC-15 Tuxedo onto the cardboard, press to the open spaces on the faceted vase. Press the cut strips with your fingers to ensure you get good contact. Always press the cut tube in the same direction on every other faceted shape. Remove the tape.

7. Apply the 1/8" tape down and across the faceted shapes. This is to keep the edges between the shapes as the background color and will define the shapes.

8. Repeat the sponge and press process in the opposite direction from the previous stamp on the unstamped faceted shapes. Remove the tape.

9. Use the Soft Fan to apply two coats of FN-001 White or SC-15 Tuxedo.

9.  Fire to cone 05/06.

 

 tolietpaperroll vase2

 

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers

Distributors

PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

info@maycocolors.com

Technical Support

614-675-2031

technical@maycocolors.com