Welcome Little One

 

Products Used

Bisque
  • MB-1293 Rectangle Dinnerware-Salad Plate
Color
  • SC-96 Aqu-ward
  • SC-97 Cant-elope
  • SC-31 The Blues
  • SC-95 Pinkie Swear
  • SC-27 Sour Apple
  • SC-35 Gray Hare
  • SC-15 Tuxedo
  • SC-16 Cotton Tail
  • FN-001 White
  • FN-009 Black
Decorating Accessories
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponge
  • AC-211 Sponge on a Stick, 3/8” Round
  • AC-230 Clay Carbon Paper
Additional Materials
  • Pencil
  • Scissors
  • Masking Tape
  • Pattern: Carriage
welcome lil one

Designer: Tim McPherson
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using the CB-604 # 4 Soft Fan, apply 2 coats of FN-001 White to the top area of the plate.
  3. Using the CB-604 # 4 Soft Fan, apply 2 coats of FN-009 Black to the back and side edges of the plate.
  4. Mark off the top and bottom border with Masking Tape, about 1” wide.
  5. Using the AC-230 Clay Carbon Paper, trace on the pattern.
  6. Using the AC-211 Sponge on a Stick, 3/8” Round, apply circles to the background area using SC-31 The Blues, SC-27 Sour Apple, SC-95 Pinkie Swear, SC-96 Aqu-ward and SC-97 Cant-elope. Repeat with these colors using a brush handle to the inside area of the basket.
  7. Using the CB-110 # 10/0 Liner, apply 2 to 3 coats of SC-35 Gray Hare to the handle and center area on the wheels.
  8. Using the CB-106 # 6 Script Liner, apply 3 coats of SC-96 Aqu-ward to the center area on the baskets cover.
  9. Using the CB-106 # 6 Script Liner, apply 3 coats of SC-27 Sour Apple to the remaining areas on the baskets cover.
  10. Mark the edge along the masking tape, then remove the tape.
  11. Using the CB-604 # 4 Soft Fan, apply 3 coats of SC-31 The Blues to one of the borders and SC-95 Pinkie Swear to the other border. Allow to dry.
  12. Using the AC-230 Clay Carbon Paper, trace on the lettering.
  13. Using the CB-110 # 10/0 Liner, fill in the lettering and tires with 2 coats of SC-15 Tuxedo.
  14. Using the CB-110 # 10/0 Liner loaded in SC-15 Tuxedo, outline and detail the basket.
  15. Using a brush handle, add dots to the border area with SC-16 Cotton Tail.
  16. Stilt and fire to shelf cone 05/06.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects