VW Bride and Groom

 

Products Used

Bisque
  • MB-1116 Casualware Dinner Plate,
Color
  • FN-006 Blue, SC-46 Rawhide, SC-52 Toad-ily Green, SC-26 Green Thumb, SC-11 Blue Yonder, SC-6 Sunkissed, SC-35 Grey Hare, SC-74 Hot Tamale, SC-15 Tuxedo, SC-30 Blue Dawn, SC-31 The Blues, SC-3 Wine About It, SC-16 Cotton Tail, SC-14 Java Bean, S-2101 Cryslat Cleat Brushing,

Decorating Accessories

  • AC-230 Clay Carbon paper, BT 910 Synthetic Sponge, CB-110 # 10/0 Liner, CB-404 # 4 Pointed Round, CB-604 # 4 Soft Fan, pencil

Miscellaneous Accessories

215.VW.Bride.Groom
Designer: Tim McPherson
 
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Divide the plate in half, and sketch in the road with a pencil.
  3. Using a sponge, pounce on 2 blended coats of SC-30 Blue Dawn and SC-31 The Blues to the sky area.
  4. Using a sponge, pounce on 2 coats of SC-46 Rawhide to the road area.
  5. Using a sponge, pounce on 2 blended coats of SC-52 Toad-ily Green and SC-26 Green Thumb to the grass area.
  6. Using the AC-230 Clay Carbon Paper, a pencil, and the pattern, trace on the car.
  7. Using the CB-404 #4 Pointed Round, apply 3 coats of SC-74 Hot Tamale to the car.
  8. Side load CB-404 #4 Pointed Round in SC-3 Wine About It and shade around the edges of the car.
  9. Using the CB-404 # 4 Pointed Round, apply 3 coats of Sunkissed to the brides hair and 3 coats of SC-14 Java Bean to the grooms hair.
  10. Using the CB-110 # 10/0 Liner, apply 3 coats of SC-6 Sunkissed to the lower area on the tail lights.
  11. Make a mixture of SC-6 Sunkissed and SC-74 Hot Tamale, and using the CB-110 # 10/0 Liner, apply it to the upper areas on the tail lights.
  12. Using the CB-404 # 4 Pointed Round, apply 3 coats of Gray Hare to the bumper. Deepen the SC-35 Gray Hare with SC-15 Tuxedo, and apply to the tires 3 times.
  13. Using the CB-404 # 4 Pointed Round, apply 2 coats of SC-16 Cotton Tail to the veil, sign, and licence plate.
  14. Using the CB-110 # 10/0 Liner, apply 3 coats of SC-46 Rawhide to the bride and grooms arm.
  15. Mix SC-16 Cotton Tail with SC-74 Hot Tamale to make a light pink, and using the CB-404 # 4 Pointed Round, apply 3 coats to the flowers. Add small daps of SC-52 Toad-ily Green for leaves.
  16. Using the CB-110 # 10/0 Liner, apply 3 coats of SC-11 Blue Yonder to the bows, and fingerprints for the "cans" that will hold signitures.
  17. Using the CB-110 # 10/0 Liner, outline and detail the entire piece with SC-15 Tuxedo.
  18. Using the CB-604 # 4 Soft Fan, apply 3 coats of FN-006 Blue to the back and edges.
  19. Using the CB-604 # 4 Soft Fan, apply 2 coats of S-2101 Crystal Clear Brushing to the top area.
  20. Stilt and fire to shelf cone 05/06.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects