Yellow Adonis

 

 
 
Products Used

Bisque
  • MB-890 11" Asian Flair Square Plate
Color
  • SC-6 Sunkissed
  • SC-15 Tuxedo
  • SC-24 Dandelion
  • SC-27 Sour Apple
  • SC-70 Pink-A-Dot
  • SC-94 Curry Around
  • SC-95 Pinkie Swear
  • FN-001 White
  • FN-047 Light Pink
Decorating Accessories
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponge
  • AC-230 Clay Carbon Paper
Yellow_Flower_Pink_Plate
 
 
Additional Materials
 
Project Info
  • Designer: Tim McPherson
  • Skill Level: Basic
  • Time: 2½ hours
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 2 coats of FN-001 White to the top of the plate. Allow to dry.
  3. Using a pencil and AC-230 Clay Carbon Paper, trace on the flower and leaves where desired.
  4. Using a CB-106 #6 Script Liner, apply 2 to 3 coats of SC-6 Sunkissed to the outer flower petals.
  5. Using a CB-106 # 6 Script Liner, apply 2 coats of SC-24 Dandelion to the 2nd row of flower petals.
  6. Using the CB-106 #6 Script Liner, apply 2 coats of SC-94 Curry Around to the flower center.
  7. Using a CB-106 #6 Script Liner, apply 2 coats of SC-27 Sour Apple to the leaves.
  8. Cut out the flower and leaves, and wet the area and press the paper cut outs firmly into place.
  9. Wet an area, and place down a few torn newspaper pieces.
  10. Using a CB-604 #4 Soft Fan, apply 1 coat of SC-SC-70 Pink-A-Dot over the top of the plate.
  11. Place a few more torn newspaper squares, then paint over the entire top again with SC-70 Pink-A-Dot.
  12. Place a few more torn newspaper squares and paint over the entire top with SC-95 Pinkie Swear.
  13. Remove all the newspaper and flower/leaf paper pieces before the color dries to avoid chipping. Allow to dry.
  14. Using a CB-110 #10 Liner, outline add stems, scrolls and detail the leaves with SC-15 Tuxedo.
  15. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-047 Light Pink to the back and edges of the plate. Allow to dry.
  16. Stilt and fire to shelf cone 06/05.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers

Distributors

PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

info@maycocolors.com

Technical Support

614-675-2031

technical@maycocolors.com