Tie-Dye Flower

 

 
 
Products Used

Bisque
  • MB-890 11" Asian Flair Square Plate
Color
  • SC-6 Sunkissed
  • SC-11 Blue Yonder
  • SC-15 Tuxedo
  • SC-16 Cotton Tail
  • SC-93 Honeydew List
  • FN-001 White
  • FN-042 Teal Blue
  • SG-401 Black Designer Liner
  • S-2101 Crystal Clear Brushing
Decorating Accessories
  • CB-106 #6 Script Liner
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponges
  • AC-213 Sponge on a stick
  • ST-343 Deco Circle Stamp
Tie-dyed_Flower
 
 
Additional Materials
  • Pencil
  • Scissors
  • Small Cups
  • Syringe (ie; flavor injector - www.goodcook.com)
  • Download Project Pattern: Tie-dyed Flower Pattern
 
Project Info
  • Designer: Marcia Roullard
  • Skill Level: Basic
  • Time: 1½ hours
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 2 coats of FN-001 White to the top of the plate.
  3. Cut out the flower shape from the pattern, re-wet the surface with water for the placement of the flower, place the paper flower on the plate, then press with a paper towel to remove excess water.
  4. Squirt some SC-6 Sunkissed, SC-11 Blue Yonder and SC-93 Honeydew List into small cups. Add some SC-16 Cotton Tail into the SC-11 Blue Yonder and SC-6 Sunkissed, mix together this is to slightly lighten the colors.
  5. Add a little water to each of the glazes, then suck up some of SC-6 Sunkissed with the syringe (without the metal tip), pull the syringe back to give it more pressure, place the plate in a sink or a box, then squirt the color on the plate, move the syringe as you squirt the color from it.  Note: no need to clean between each color.
  6. Repeat squirting with the SC-11 Blue Yonder then SC-93 Honeydew List.
  7. Remove the paper flower before the color dries.
  8. Pencil in the center of the flower.
  9. Using a CB-106 #6 Script Liner, brush stroke in the petals with SC-11 Blue Yonder, applying 2 coats.
  10. Using a CB-106 #6 Script Liner, apply 1 coat of SC-16 Cotton Tail to the center of the flower.
  11. Using the AC-213 Sponge on a Stick load the sponge with SC-15 Tuxedo. Tap the SC-15 Tuxedo onto the ST-343 Deco Circle Stamp then press the stamp gently stamping the center of the flower. Allow to dry.
  12. When the SC-11 Blue Yonder has dried on the flower, use SG-401 Black Designer Liner to quickly outline the petals.
  13. Using a CB-604 #4 Soft Fan, apply 3-4 coats of FN-042 Teal Blue to the back of the plate. Allow to dry.
  14. Stilt and fire to shelf cone 05/06.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers

Distributors

PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

info@maycocolors.com

Technical Support

614-675-2031

technical@maycocolors.com