Doodling Dancing Container


Products Used

  • MB-1372 Dancing Container
  • SC-89 Cutie Pie Coral
  • FN-211 Sheer Blue
  • FN-214 Pastel Jade
  • S-2101 Crystal Clear Brushing
  • SG-401 Black Designer Liner
  • SG-403 Red Designer Liner
  • SG-404 Blue Designer Liner
Decorating Accessories
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponge
Additional Materials
  • Pencil
Project Info
  • Designer: Marcia Roullard
  • Skill Level: Basic
  • Time: 1½ hours


  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Place some S-2101 Crystal Clear Brushing into a small cup and add a little bit of water to slightly dilute it (about 3 parts glaze and 1 part water).  It should be the consistency of a coffee cream.  Pour this into the container and roll around to completely coat the interior of the container.  Drain out the excess glaze and keep container inverted until it has lost its shine. Wipe off any glaze from the outside using a damp sponge. Allow to dry.
  3. Sketch on the design with your pencil.
  4. Using the various Designer Liner colors, SG-404 Blue, SG-403 Red, and SG-401 Black, draw over the design.
  5. Using a CB-106 #6 Script Liner, apply 1 coat of SC-89 Cutie Pie Coral to the flower petals and scrolls on lid.
  6. Using a CB-604 #4 Soft Fan and a CB-106 #6 Script Liner, apply 2 coats of FN-211 Sheer Blue to the bottom of the container and to the scallop around the knob and the knob.
  7. Using a CB-604 #4 Soft Fan, apply 2 coats of FN-214 Pastel Jade to the remainder of the lid and to the remainder of the jar. Alter the brush strokes in different directions to avoid any streaks. Allow to dry.
  8. Stilt and fire to shelf cone 05/06.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support