Happiness Bird

 

 
 
Products Used

Bisque
  • MB-1284 Oval Canister
Color
  • SC-6 Sunkissed
  • SC-5 Tuxedo
  • SC-27 Sour Apple
  • SC-35 Gray Hare
  • SC-46 Rawhide
  • SC-75 Orange-A-Peel
  • FN-227 Celery
  • SG-401 Black Designer Liner
  • SG-403 Red Designer Liner
  • SG-405 Green Designer Liner
  • CG-717 Pistacho
  • CG-788 Dutch Enamelware
  • Clear Glaze of Choice
Decorating Accessories
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponge
  • AC-230 Clay Carbon Paper
  • AC-213 Large Sponge on a Stick
  • ST-124 Maze Stamp
CC2015 HappinessBird
 
 
Additional Materials
  • Pencil
  • Small Cup
  • Craft Knife or Scissors
  • Download: Pattern
 
Project Info
  • Designer: Tim McPherson
  • Skill Level: Basic
  • Time: 1½ hours
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Slightly thin FN-227 Celery with water (3:1) in a small cup. It should be the consistency of a coffee cream. Pour this into the canister and roll around to completely coat the interior.  Drain out the excess glaze and keep the canister inverted until it has lost its shine. Wipe off any glaze from the outside using a damp BT-910 Synthetic Sponge. Allow to dry.
  3. With a pencil and AC-230 Clay Carbon Paper, trace on the patterns.
  4. Using a CB-106 #6 Script Liner, apply 1 to 2 coats of thinned SC-35 Gray Hare to the bird’s body and wing, staying out of the eye area.
  5. Using a CB-110 #10/0 Mini Liner, apply 1 coat of SC-6 Sunkissed to the bird’s beak and eye opening.
  6. Cut out the inside area of the bird and tail from the pattern, leaving the wing in place. This will act as a mask.
  7. Aligning the pattern with the bird on the bisque, hold the pattern in place as a stencil.
  8. Using AC-213 Large Sponge on a Stick, pounce SC-15 Tuxedo onto the ST-124 Maze Stamp. 
  9. Stamp pattern onto the bird and it's tail. Allow to dry. Remove mask pattern.
  10. Using the SG-401 Black, outline and detail the bird.
  11. Using the SG-405 Green, outline and detail the stems and leaves. 
  12. Using the SG-403 Red, outline the flower and flower centers.
  13. Write on the word “HAPPINESS” on the wing, and using the SG-401 Black, add the lettering.
  14. Using a CB-106 #6 Script Liner, apply 1 thinned coat of SC-27 Sour Apple to the leaves and stems.
  15. Using a CB-106 #6 Script Liner, apply 1 thinned coat of SC-75 Orange-A-Peel to the flowers.
  16. Using a CB-106 #6 Script Liner, apply 1 thinned coat of SC-6 Sunkissed to the flower centers.
  17. Using a CB-604 #4 Soft Fan, apply 2-3 coats of CG-717 Pistachio to the bottom grass area of the canister as well as the knob of the lid.
  18. Using a CB-604 #4 Soft Fan, apply 1 coat of CG-788 Dutch Enamelware to the background.
  19. Apply clear glaze of choice. Be sure not to dip this piece as the crystals from the glazes could come off and contaminate the glaze tank.
  20. Stilt and fire to shelf cone 06/05.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects