Aqua & Taupe Dinnerset

 

Products Used

Bisque
  • MB-116 Casualware Dinner Plate, MB-115 Casualware Salad Plate, MB-113 Casualware Cereal Bowl, MB-145 Loop Handled Mug
Color
  • FN-32 Canton Jade, FN-45 Taupe

Decorating Accessories

  • BT-910 Synthetic Sponge, CB-604 #4 Soft Fan, MC-001 6 mm (1/4") Low Tack Masking Tape, MC-002 12 mm (1/2") Low Tack Masking Tape
  • Also try with Designer Stencils SL-441 Spots, SL-433 Crooked Lines

Miscellaneous Supplies

  • 1" circle punch, 1/2" circle punch, Needle Tool, Paper

 

175.TurquoiseTaupeDinnerwareSet
Designer: Adena Griffith
 
 

Instructions

  1. Begin with a properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust
  2. Apply 3 coats of FN-32 Canton Jade to the MB-116 Casualware Dinner Plate and the MB-113 Casualware Cereal Bowl using the CB-604 #4 Soft Fan Brush.
  3. Allow this to completely dry. Affix the MC-001 6 mm (1/4") Low Tack Masking Tape and MC-002 12 mm (1/2") Low Tack Masking Tape to the MB-116 Casualware Dinner Plate in a random stripe pattern. Make sure the tape is secure as this will act as a resist. 
    • Using Designer Stencils SL-441 Spots and SL-433 Crooked Lines will also produce the same effect. Be sure to have the Designer Stencil flush to the bisque surface when applying top color.
  4. Using CB-604 #4 Soft Fan, apply 2 coats of FN-45 Taupe to the front over the tape and bowl. When the shine of the glaze is gone, remove the tape.
  5. Once that is dry apply 3 coats to the back of the plate and bowl using CB-604 #4 Soft Fan.
  6. Apply 3 coats of FN-32 Canton Jade to the inside of the MB-145 Loop Handled Mug. Allow to dry completely.
  7. Apply 3 coats of FN-32 Canton Jade to the MB-115 Casualware Salad Plate and MB-145 Loop Handled Mug using CB-604 #4 Soft Fan.
  8. Use the 1" circle punch and 1/2" circle punch to cut out paper circles.
  9. Apply final coat of FN-32 Canton Jade to the front of the plate and outside of the mug and apply the circles in a pattern on the wet glaze. Use the image as a reference.
  10. Once that has dried, using CB-604 #4 Soft Fan, apply 3 coats of FN-45 Taupe to the front of the bowl and outside of the mug. When the shine of the glaze has gone remove the circles using a needle tool.
  11. Clean up any lines on all of the bisque pieces using a needle tool.
  12. Silt all pieces and fire to cone 06.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects