|
||||||||||||||||||
What is Pottery Coat™ Base?
Pottery Coat is a non-toxic ceramic glaze that simulates the look of high-fired pottery or stoneware. Although Pottery Coat can be used alone, the best looks are achieved when used as a base coat in combination with Pottery Cascade and a flowing non-toxic glaze, such as Elements.
How do I apply Pottery Coat™ Base?
Apply to properly fired shelf cone 04 bisque. Lightly dampen the bisque
with a moistened sponge before painting. This allows better adhesion to
the bisque. Shake jar well before application. Apply three even coats
with a soft fan brush.
How long does Pottery Coat™ Base need to dry?
The shiny wet look should disappear before adding the second and third
coats of Pottery Coat Bases. If the piece has been glazed inside, allow
the inside color to dry before starting on the outside colors. Do not
force dry with heat, as dry cracking may develop where the layers of product
are extremely heavy. If multiple layers of products are applied, allow
at least 24 hours of drying time before firing. The piece should no longer
be cool to the touch. Make sure the kiln is well ventilated to allow moisture
an organic material to escape.
How is Pottery Coat™ Base fired?
A shelf cone 06 is recommended. When high fired, Pottery Coat turns glossy.
For surface changes, consult Mayco’s High Fire Guide.
What other combinations can be made?
Not only do Pottery Coat Base and Pottery Cascades work well together
with Elements Chunkies. You can get a completely different look using
other non-toxic glazes, such as Mayco’s Classic Crackles, Crystalites,
Elements and Stroke & Coat. No two pieces will look alike. The shape
of the piece, glaze application and firing temperature and kiln load all
affect the final glaze surface.
Is Pottery Coat™ Base Food-Safe?
Although Pottery Coat is non-toxic and thus food safe when fired properly
according to FDA standards, they are not be practical for food containers
due to the porous surface characteristics. To use Pottery Coat on a functional
item, you must apply clear glaze to seal the surface. This will darken
the color and will show uneven application and brushstrokes.
