• New Stoneware Glazes

    New Stoneware Glazes

    8 new Stoneware glazes for mid-range and high-fire temperatures! Read More
  • Artist Feature: Cheryl Farrens

    Artist Feature: Cheryl Farrens

    Cheryl combines her background in chemistry and love for horses to create faux bronzed art with Mayco's Magic Metallics and Stoneware products on a variety of mediums. Read More
  • SW-184 Speckled Toad Combos

    SW-184 Speckled Toad Combos

    View our glaze combinations at cone 6 and cone 10 firings with SW-184 Speckled Toad. Read More
  • New Mayco Molds!

    New Mayco Molds!

    Brand new garden mold shapes exclusive to the mold line! Slip cast with earthenware or stoneware slip. Read More
  • MB-1551 Quirky Bird, MB-1552 Quirky Frog and MB-1553 Quirky Monkey

    MB-1551 Quirky Bird, MB-1552 Quirky Frog and MB-1553 Quirky Monkey

    Our new Quirky Critters are functional, whimsical and clever enough to inspire painters of all ages! Read More
  • 1
  • 2
  • 3
  • 4
  • 5

colors mod2

bisque mod2

slips and molds mod2

tools mod2

Whats New mod2

Project Library mod2

Health Caution, Non Fired Products
Premixed, Solvent Base
North American Format

COMPANY INFORMATION

Prepared:   June 15, 2013
Supersedes:   August 1, 2010
Manufacturer:   Mayco Colors
    Division of Coloramics, LLC
    4077 Weaver Court South
    Hilliard, Ohio 43026
    United States of America

Distributor Contacts:

USA___________________________ Local Phone_______________________
Australia_______________________ Local Phone_______________________

IN CASE OF EMERGENCY PLEASE CONTACT YOUR LOCAL POISON CONTROL CENTER
Prepared by: MSDS department
Information Telephone Number: 614-876-1171


SECTION 1: PRODUCT IDENTIFICATION

Product Identification: Art supplies - stains

Product Usage: Decorating for wood, metals and ceramics

Accessory Products AC-301, AC-520
Touch 'n Glo Wax Metallics TL-200, TL-203, TL-204, TL-207
Translucent Oil-Base Stains TL-001, TL-004, TL-006, TL-008, TL-014, TL-101, TL-105, TL-106, TL-108, TL-109, TL-115, TL-119, TL-120, TL-121, TL-124, TL-125, TL-129, TL-132, TL-134, TL-137
Twinkles TL-300, TL-309, TL-310
Discontinued Products TL-012, TL-023, TL-025, TL-026, TL-027, TL-103, TL-107, TL-110, TL-111, TL-113, TL-114, TL-116, TL-123, TL-126, TL-135, TL-211, TL-213, TL-214, TL-301, TL-302, TL-303, TL-304, TL-311, TL-312, TL-314, MS-1, MS-5, MS-6, MS-7, MS-8

 


SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS

Ingredients CAS ACGIH
TLV
OSHA
PEL
Stoddard Solvent 8052-41-3 525 mg/m3 525 mg/m3
Wax 63231-60-7 N/A N/A
Pigments Varies N/A N/A

 

*Unless specified, pigments are used to provide color and contain no harmful materials.

 


SECTION 3: HAZARDS IDENTIFICATION

 

 

Paint contains organic solvents and various pigments.

 

In liquid form the crystalline silica ingredient in the kaolin clay presents no inhalation danger. Crystalline silica dust may be present if dried paint is excessively handled.

Route(s) of Entry: Inhalation, Ingestion; absorption through the skin is negligible.

Health Hazards (acute and chronic): Prolonged inhalation of silica, in excess of TLV, over an extended period of time may result in injury to the lungs.

 


 

SECTION 4: FIRST AID MEASURES

 

  • Inhalation: Remove from exposure to fresh air
  • Skin: Wash skin with soap and water. Wash contaminate clothing before reuse.
  • Eyes: Flush eyes with large quantities of water for at least 15 minutes. If irritation persists after washing, contact a physician.
  • Ingestion: Contact a physician immediately.

 

 


 

SECTION 5: FIRE FIGHTING MEASURES

 

 

 

 

Flash Point (method used): 125° F, tag closed up
LEL: 0.8 %
UEL: 5.0%
Flammable Limits: Auto ignition at 540°F
Extinguishing Media: Water fog, chemical foam, dry chemical, CO2.
Special Fire Fighting Procedures: Wear self contained breathing aparatus when fighting fire in confined space
Unusual Fire and Explosion Hazards:

Vapors are heavier than air and may travel along ground to distant sources of ignition such as pilot lights.
Spontaneous combustion may occur if rags contaminated with product are not cleaned after use.

 

 


 

 

 

SECTION 6: ACCIDENTAL RELEASE MEASURES

Steps to be taken in case material is released or spilled:

 

 

Uncontaminated material may be recovered and re-used. If contaminated, absorb with sand and place into a receptacle for disposal.

 

Waste Disposal Method: Follow Federal or State and Local regulations for disposal.

 

Testing of the waste may be required to determine status under the hazardous waste regulations.

 


 

SECTION 7: HANDLING AND STORAGE

 

PRECAUTIONS FOR SAFE HANDLING AND USE:

  • Engineer Control: None
  • Work practices: Store away from feed and food. Do not smoke, eat or drink while handling.
  • Ventilation: Local exhaust (if spray applying)
  • Procedure/equipment: None
  • Procedure for leaks or spills: Uncontaminated material may be recovered and reused. If contaminated, absorb with sand and place into a receptacle for disposal.
  • Waste Disposal Method: Follow Federal or State and Local regulations for disposal.

 


SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

 

  • Respiratory Protection: Use a NIOSH approved respirator if spray applying.
  • Ventilation: Local Exhaust: For spraying (equipment may have to be certified explosion proof for use with flammable based products.
  • Protective Gloves: Use gloves specified for use with solvent based paints.
  • Eye Protection: Wear appropiate eye protection or safety glasses.
  • Other Protective Clothing or Equipment: Wear appropriate clean, protective clothing such as, but not limited to, overalls, smocks, and aprons.
  • Work/Hygienic Practices: Food, beverages, and smoking materials should not be in the work area. Hygiene is very important. Wash thoroughly before eating, drinking, smoking, or applying cosmetics.

Keep away from opne flame or heat source.


SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

 

Appearance: Various Colored Liquids & Moist Solids
Odor/Odor Threshold: Mild solvent or oil smell
PH: N/A
Boiling Point: 315°F - 385°F
Vapor Pressure: 6mm at 106°F
Vapor Density: 3.5 to 4.0 (air = 1)
Melting Point: N/A
Specific Gravity (H2O=1): .90 to 1.15
Flammable Limits: None
Explosive limits: None
Partition Coefficient: None
Oxidizing Properties: None
Solubility in Water: Negligible
Percent Volatile by Volume: None
Evaporation Rate: None
Freezing point: N/A
Flash Point: None
Auto ignition temperature: None

 

 


 

 

SECTION 10: STABILITY AND REACTIVITY DATA

 

  • Incompatibility (material to avoid): None
  • Stability: Stable (conditions to avoid): N/A
  • Hazardous Decomposition or by-products: None
  • Hazardous Polymerization: Will not occur
  • Conditions to avoid: Spontaneous combustion may occur if rags contaminated with product are not cleaned after use.

 


SECTION 11: TOXICOLOGY INFORMATION

 

Hazard to Humans: As packaged and provided by the manufacturer: None during normal use. Over exposure may cause eye and respiratory track irritation and transient central nervous system effects.

 

 

WARNING: CONTAINS QUARTZ

MAY BE HARMFUL BY BREATHING DUST OR SPRAY MIST
EXPOSURE MAY CAUSE LUNG DAMAGE
POSSIBLE CANCER AGENT BASED ON TESTS WITH LABORATORY ANIMALS

PRECAUTIONARY STATEMENTS:

KEEP OUT OF THE REACH OF CHILDREN
AVOID INHALATION

This product contains chemicals known to the State of California to cause cancer.

Health Hazards (acute and chronic):
Prolonged inhalation of silica dust, in excess of TLV, over an extended period of time may result in injury to the lungs

 

 

 

Animal experiment:

Acute: May cause eye and respiratory track irritation and transient CNS effects. Harmful or fatal if swallowed, vapors harmful.

Chronic/Other: May cause kidney, liver and central nervous system defects, fetal toxicity has been reported in rodents following high oral and dermal exposure to one ingredient.

 


 

SECTION 12: ECOLOGICAL INFORMATION

 

Mobility: N/A
Persistence/Degradability: N/A
Bioaccumulation: N/A
Ecotoxicity: N/A

 

 


 

 

SECTION 13: DISPOSAL CONSIDERATIONS

 

Waste Disposal Method: Follow your Federal or State and Local regulations for disposal.

 

Testing of the waste may be required to determine status under the hazardous waste regulations.

Waste from residue/unused product: Can be landfilled according to local regulations.
Contaminated packing: Can be landfilled according to local regulations.


SECTION 14: TRANSPORTATION INFORMATION

For US Dept. of Transportation:

UN Number: 1263, Guide number 128


 

 

 

SECTION 15: REGULATORY INFORMATION

Silica is listed by California, Proposition 65

 

Silica is listed on the IARC, OSHA or NTP carcinogen list.

 

All ingredients are on U.S. TSCA / EC / AICS / DSL Inventory.

 

See local requirements.


SECTION 16: ADDITIONAL INFORMATION

Ingestion and Inhalation are the predominant means entry into the body. Most inhalation dangers can be addressed by wearing a NIOSH approved respirator during spray application. DO NOT SPRAY APPLY WITHOUT USING A NIOSH RESPIRATOR.

Use caution when handling unfired, dried paint - minimize the creation of dust.

 

This information is furnished without warranty, representation, inducement or license of any kind, except that it is accurate to the best of knowledge of COLORAMICS, LLC or obtained from sources believed to be accurate.

COLORAMICS, LLC does not assume any legal responsibility for use or reliance on same. Customers are encouraged to conduct their own tests before using any product. Read the product label.

Communities

  • Mayco Creative Studios +

    Mayco Creative Studios Dedicated to key managers and owners of Paint Your Own Pottery studios (PYOP), mobile studios, dealers or retailers. MCS provides retail education (including selling, merchandising, signage, display ideas), identifies trends and creates projects to help you increase sales. Read More
  • The Ceramic Workshop +

    The Ceramic Workshop If you enjoy decorating & designing on ceramic bisque and greenware, this is the place for you! Ceramic Workshop is home to ideas we hope will inspire your creativity and fuel your desire to express your personal style. Read More
  • The Mud Room +

    The Mud Room The Mudroom is the place for all aficionados of clay: potters, students, art educators, clay artists and enthusiastic ceramists. Mayco’s Mud Room is the place to get up-to-date information on clay artists, techniques, products. Read More
  • Artlink +

    Artlink Artlink is dedicated to Art Educators and aims to inspire creativity through unique lesson plans, classroom projects, fundraising ideas, workshop opportunities and new products to try with your students. You’ll also find health and safety information to keep your classroom up-to-date on the latest issues. Read More
  • 1

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers

Distributors

PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

info@maycocolors.com

Technical Support

614-675-2031

technical@maycocolors.com

custom-css-security