Tangled Sun Stoneware Platter


Products Used

  • SB-118 12” Stoneware Platter

  • SG-401 Designer Liner Black
  • SG-403 Designer Liner Red
  • SG-404 Designer Liner Blue
  • SG-405 Designer Liner Green
  • SG-408 Designer Liner Orange
  • SW-132 Mirror Black
  • SW-124 Matte Maycoshino
  • SW-212 Peacock

Decorating Accessories

  • AC-230 Clay Carbon Paper
  • CB-604 #4 Soft Fan
  • CB-106 #6 Script Liner

Miscellaneous Accessories

  • Pencil
  • Synthetic Sponge
  • Pattern


Designer:Laura Fraedrich


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Transfer pattern onto the platter using Clay Carbon Paper and a pencil Using SG-401 Designer Liner Black, draw over the lines of the design on the plate.
  3. Using the other colors of Designer Liner, fill in the small shapes in the design according to the photo.
  4. Using the CB-604 Soft Fan, apply 3 coats of SW-132 Mirror Black to the back of the platter, making sure to leave the very bottom and the foot of the plate unglazed.
  5. Using the CB-604 Soft Fan, apply 3 coats of SW-132 Mirror Black to the outer rim of the front of the platter.
  6. Using the CB-106 Script Liner, apply 3 coats of SW-124 Matte Maycoshino over the entire sun design.
  7. Using the SB-604 Soft Fan, apply 3 coats of SW-212 Peacock to the rest of the front of the plate. Use the CB-106 Script Liner to get into the tight areas.
  8. Wipe off any excess glaze from the foot of the plate with a damp sponge. Do not stilt or hang over the edge of the kiln shelf.
  9. Fire to cone 5/6.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects