Candied Hearts

 

Products Used

Glass
  • 8"x8" Clear Glass
  • Other desired glass for edges
Color
  • SG-401 Black
  • SG-403 Red

Decorating Accessories

  • Colored Frit
  • Desired Slump Mold

Miscellaneous Accessories

  • Pencil
  • Glass Cleaner
  • Glass Cutter
  • Hair Spray or Fused Glass Tack
  • Firing Paper
  • Slump Mold
  • Download: Pattern

 

WP CandiedHearts
Designer: Renee Lindquist
 
 

Instructions

  1. Cut a piece of clear glass to an 8x8” square, and clean with alcohol or glass cleaner
  2. Place you glass on top of your pattern and use SG-401 Black Designer Liner to trace the outline of the candied hearts. Use SG-403 Red Designer Liner to write in the words on the hearts. The words should be backwards.
  3. When the Designer Liner is dry sprinkle your chose of colored frit (I used transparent frit) on the different heart and fill them in.
  4. Use hair spray or any fused glass tack to stick you frit down. Be sure the frit is stuck down very well because you are going to flip your piece over and you don’t want it to move.
  5. Flip it over onto a piece of thin fire paper.
  6. Cut a strip of glass any color ½” x 7 ½” you will use this for the boarder. Place a couple of dots of glue to hold it down.
  7. Fire to a contour fuse.
  8. Slump into your favorite mold.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects