Love Tray

 

 
 
Products Used

Bisque
  • MB-1292 Rectangle Dinner Plate
Color
  • SC-1 Pink -A-Boo
  • SC-74 Hot Tamale
  • SC-95 Pinkie Swear
  • FN-001 White
  • FN-004 Red
Decorating Accessories
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponge
Love_is_in_the_Air
 
 
Additional Materials
  • Pencil
  • 1/2" Masking Tape
  • Scissors
  • Heart Paper Punches
  • 20# Copy Paper
  • Download Project Pattern
 
Project Info
  • Designer: Bob Moreni
  • Skill Level: Basic
  • Time: 2 hours
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Apply ½” Masking to the outer edge of the center of the plate.
  3. Using a CB-604 #4 Soft Fan, apply 2 coats of FN-001 White to the center area of the plate. Allow to dry.
  4. Cut out the word love and the heart patterns. With water attach the word love. Blot with a paper towel to absorb any excess water.
  5. Place the hearts to the center of the plate and trace around with a pencil, also trace around the word love.
  6. Using a CB-106 #6 Script Liner, apply 3 coats of SC-74 Hot Tamale to the hearts.
  7. Remove the paper word love.
  8. With a pencil, sketch a 1/8” border to the inside of the word love.
  9. Using a CB-110 #10/0 Liner, apply 2-3 coats of SC-95 Pinkie Swear to the border.
  10. Apply ½” Masking Tape to the edge of the center area
  11. Using a CB-604 #4 Soft Fan, apply 3 coats of SC-1 Pink-A-Boo to the outer edge of the plate. Allow to dry.
  12. With the heart paper punches punch out 4 larger hearts for the corners of the plate and 12 smaller hearts for in between. Apply the negative punch-outs to the edge of the plate with water. Blot with a paper towel to absorb any excess water.
  13. Using a CB-106 #6 Script Liner, apply 3 coats of SC-74 Hot Tamale to the hearts.
  14. Remove the paper cut out hearts.
  15. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-004 Red to the back of the plate.  Allow to dry.
  16. Stilt and fire to shelf cone 06/05.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects