Dimensional Daffodils

Tinted Snowfall with Stroke & Coats to create this dimensional flower vase.



Products Used

Bisque
  • MB-1145 - Flat Tulip Vase
Color
  • FN-301 - Marshmallow White
  • SC-6 - Sunkissed
  • SC-15 - Tuxedo
  • SC-24 - Dandelion
  • SC-26 - Green Thumb
  • SC-36 - Irish Luck
  • SC-41 - Brown Cow
  • SG-302 - Snowfall
Decorating Accessories
  • AC-230 - Clay Carbon Paper
  • BT-910 - Synthetic Sponges
  • CB-106 - #6 Script Liner
  • CB-210 - #10/0 Detail Liner
  • CB-404 - #4 Pointed Round
  • CB-604 - #4 Soft Fan
Dimensional_Daffodils_Vase
Additional Materials
  • Pencil
  • Palette Knife
  • Water Bowl
  • Paper Towel
  • Download Project Pattern: Daffodils
Project Info

Instructions


  1. Begin with properly fired shelf cone 06 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Slightly thin some FN-301 Marshmallow White and roll the inside of the vase. Remove any drips from the outside with the BT-910 Synthetic Sponge.
  3. Using the CB-604 #4 Soft Fan, apply 3 smooth coats of FN-301 Marshmallow White to the outside of the vase. Allow to dry.
  4. Using the AC-230 Clay Carbon, trace on the pattern.
  5. For the flowers and leaves, mix each Stroke & Coat color 50/50 with SG-302 Snowfall, using a palette knife.
  6. Using the CB-404 #4 Pointed Round, apply 1 generous coat of the SC-6 Sunkissed mixture to the back petals of each flower, allowing the color to build up. Apply the SC-24 Dandelion mixture to the trumpet area.
  7. Using the CB-106 #6 Script Liner, apply 1 generous coat of the SC-26 Green Thumb mixture to the leaves, and the SC-36 Irish Luck mixture to the stems.
  8. Using the CB-404 #4 Pointed Round, apply 1 generous coat of the SC-41 Brown Cow mixture to the paper areas on the flowers (where the flower stem meets the blossom).
  9. Using the CB-404 #4 Pointed Round, side load in SC-6 Sunkissed and shade the edges of the petals and inside the cup areas.
  10. Using the CB-404 #4 Pointed Round, side load in SC-26 Green Thumb and shade the edges of the leaves.
  11. Using the CB-404 #4 Pointed Round, apply 1 very thin coat of SC-41 Brown Cow to the bee wings.
  12. Using the CB-404 #4 Pointed Round, apply 1 coat of SC-6 Sunkissed to the bee's body.
  13. Using the CB-210 #10/0 Detail Liner loaded in SC-15 Tuxedo, outline and detail the entire design. Allow to dry.
  14. Stilt and fire to shelf cone 06.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects