- Last Updated: Tuesday, 04 April 2017 16:38
- Wooden Canvas (craft store)
- SS-135 White
- SS-138 Flat Black
- SS-317 Turquoise
- SS-335 Rich Blue
- MM-103 Deep Bronze Metallic
- MM-106 Steel Metallic
- MM-305 Rapid Rust
- CB-604 #4 Soft Fan
- CB-110 #10/0 Mini Liner
- ST-127 Crackle Stamp
- AC-213 Sponge-on-a-Stick
- Mod Podge Matte
- BT-910 Synthetic Sponge
Designer: Laura Fraedrich
- Using the CB-604 #4 Soft Fan brush, apply MM-106 Steel Metallic to the pattern sheet on the opposite side of the pattern. When Dry, apply a heavy coat of MM-305 Rapid Rust over the MM-106 Steel Metallic and set aside.
- Using the CB-604 #4 Soft Fan brush, apply SS-335 Rich Blue and SS-317 Turquoise, alternating sections and blending together while wet.
- Using the AC-213 Sponge-on-a-Stick load the sponge with MM-103 Deep Bronze Metallic then blot off excess glaze. Using a light up and down pouncing motion apply the glaze to the ST-127 Crackle Stamp then gently press down the “inked” up stamp onto the bisque. Allow to dry.
- With scissors, cut out heart, circles and lock shape from the rusted paper. Using the CB-604 #4 Soft Fan brush, apply a coat of Mod Podge Matte to the backs of the rusted shapes and adhere to the painted wood canvas.
- Load a section of the Synthetic Sponge with MM--103 Deep Bronze Metallic then blot off excess glaze. Using a light up and down pouncing motion apply the paint to the edges of the piece.
- Load a section of the Synthetic Sponge with a small amount of SS-135 White then blot off excess glaze. Use the loaded sponge to create highlights around the heart by wiping the sponge onto the piece.
- Using the CB-110 #10/0 Mini Liner brush, apply SS-135 White around the rusty parts of the piece to create more intense highlights.
- Using the same brush, apply SS-138 Flat Black around the rusty parts of the piece to create shadows.