Copper Roof Fairy House


Products Used

  • MB-1421 Small House Vase
  • EL-132 Rust Red, EL-134 Mirror BLue, MM-106 Steel Metallic, MM-102 Green Patina, SS-138 Jet Black

Decorating Accessories

  • BT-910 Synthetic Sponge, MM-600 Spritzer Caps, CB-604 #4 Soft Fan, CB-106 #6 Script Liner

Miscellaneous Supplies

  • Paper Towels


Designer: Marcia Roullard


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Thin FN-009 Black with water (3:1), pour to the inside and coat all sides. Pour out the excess glaze and leave bisque inverted to drain. Wipe away any dripped glaze using BT-910 Synthetic Sponge.
  3. Using CB-106 #6 Script Liner, brush SC-15 Tuxedo over the detail. Use a damp sponge to wipe off the excess glaze, leaving SC-15 Tuxedo in the detail of the house.
  4. Using CB-106 #6 Script Liner, brush the windows with two coats of S-2101 Clear.
  5. Using CB-106 #6 Script Liner, brush the door with 2 coats of EL-135 Mirror Blue.
  6. Using CB-106 #6 Script Liner and CB-604 #4 Soft Fan, brush the lower section of the house with 2 coats of EL-132 Rust Red, brushing in different directions as the direction of your brush strokes will show.
  7. Fire to cone 05/06.
  8. After fired, using CB-604 #4 Soft Fan, brush 1 coat of SS-138 Jet Black to the roof.
  9. Using CB-604 #4 Soft Fan, brush 1 heavy coat of MM-106 Steel Metallic to the roof, letting dry to the touch.
  10. Brush a second coat of MM-106 Steel Metallic to the roof. Screw on MM-600 Spritzer Cap to a bottle of MM-202 Green Patina. Spray on a generous coat of MM-202 Green Patina, making sure to spray the roof fully. *This process needs to be done immediately following the second coat. Rusting will begin almost immediately.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support