Element Giraffe


Products Used

  • MB-1431 Faceted Giraffe
  • SG-401 Black, EL-125 Sahara Sands

Decorating Accessories

  • ST- 127 Crackle Stamp, CB-604 Soft Fan, Bt-910 Synthetic Sponge

Miscellaneous Accessories

  • 2" Foam Roller



Designer: Marcia Roullard


  1. Begin with a properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove any dust making sure not to over saturate the bisque.
  2. Brush the Giraffe with two coats of EL-125 Sahara Sands, brushing in different directions with CB-604 Soft Fan.
  3. Allow to dry.
  4. Roll SG-401 Black over the ST-127 Crackle stamp with foam roller making sure not to overload the applicator. Too much color will result in a blurred messy image. Turn the stamp over onto the desired area and press down on the stamp so that the stamp is making contact with the area you want stamped. Make sure not to rub back and forth or this will cause a double image.  Stamp the Giraffe leaving some of the small faceted shapes plain. Allow to dry
  5. Outline all the faceted shapes with SG-401 Black.
  6. Fire to self cone 06. 

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904


Technical Support