Spotted Faceted Owl


CD1477 EL212 crop

Products Used

  • MB-1477 Faceted Owl or CD-1477 Faceted Owl
  • EL-212 Spotted Walnut
  • EL-135 Rare Earth
  • SC-15 Tuxedo
  • SC-41 Brown Cow
  • SC-97 Cant-elope
  • SG-401 Black

Decorating Accessories

  • CB-604 Soft Fan
  • CB-106 Script Liner
  • CB-110 Liner
  • ST-133 Wood Grain Stamp

Decorating Accessories

  • Sponge, Water, sponge on a stick
Designer: Marcia Roullard


  1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.

  2. On a palette, thin slightly SG-401 Black brush with the fan over the claws and stump, shade around the eyes, nose, head, and wings where they attach to the body. Wipe back the excess with a damp sponge to give it shadow.

  3. Use the tip on the SG-401 Black to outline the facets around the eyes, nose, and forehead.

  4. Use the SG-401 Black with the sponge on a stick to stamp with the ST-133 Wood Grain Stamp on the log.

  5. Brush three coats of EL-135 Rare Earth on the log base use the fan brush.

  6. Brush the claws with 2 coats of SC-41 Brown Cow, shade again with SC-15 Tuxedo, do darken and avoid using a clear glaze to gloss the SG-401 Black.

  7. Brush the forehead and the large section around the eyes of the owl with 2 coats of EL-122 Spotted Walnut, avoid using many crystals as it will run. Brush the body of the owl with two coats of the bottom sections, brush the third coat two inches from the bottom as the color will move. Avoid using too many crystals near the bottom third of the owl.

  8. Brush the eye with two coats of SC-97 Cant-elope, and the pupil with SC-15 Tuxedo.

  9. Fire to cone 06.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support