Star of David - Set

 

Products Used

Bisque
  • MB-102 Coupe Dinner Plate
  • MB-1067 Kiddush Cup
Color
  • SC-6 Sunkissed
  • SC-11 Blue Yonder
  • SC-31 The Blues
  • SC-45 My Blue Heaven
  • SC-76 Cara-bein Blue
  • SG-402 White
  • SG-404 Blue
  • SG-407 Yellow
  • SG-410 Bright Blue
  • S-2101 Crystal Clear Brushing

Decorating Accessories

  • AC-230 Clay Carbon Paper
  • BT-910 Synthetic Sponge
  • CB-404 #4 Pointed Round
  • CB-604 #4 Soft Fan

Additional Materials

  • Pencil
  • Scissors
  • Download: Pattern
Star_of_David_Set.jpg
Designer: Adena Griffith
 
 

Instructions

MB-102 Coupe Dinner Plate:

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using CB-604 #4 Soft Fan, apply 3 coats of SC-11 Blue Yonder to the back of the MB-102 Coupe Dinner Plate.
  3. Using scissors, cut out the stars from the pattern. Using water, place the paper star cut outs onto the top of the plate, as shown. This will act as a mask.
  4. Using CB-604 #4 Soft fan, apply 3 coats of SC-76 Cara-Bein to the top of the plate, over the paper star cut outs. Once the third coat has lost its shine, remove the paper from the plate.
  5. Puddle in SC-6 Sunkissed, SC-11 Blue Yonder, and SC-45 My Blue Heaven into the star shapes using a CB-404 #4 Pointed Round.
  6. Once the stars are dry add in the dots using SG-410 Bright Blue, SG-407 Yellow, SG-404 Blue, SG-402 White.
  7. Once the dots are dry, apply one heavy coat of S-2101 Crystal Clear Brushing using a CB-604 #4 Soft Fan brush.
  8. Stilt and fire to cone 06.

MB-1067 Kiddush Cup:

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using CB-604 #4 Soft Fan, apply 3 coats of SC-31 The Blues to the handle of the MB-1067 Kiddush Cup.
  3. Using CB-604 #4 Soft Fan, apply 3 coats of SC-76 Cara-Bein to the inside of the cup.
  4. Using AC-230 Clay Carbon Paper and a pencil, trace the pattern onto the cup.
  5. Using CB-404 #4 Pointed Round, apply 3 coats of SC-6 Sunkissed to the inside of the star.
  6. Using SG-404 Blue, apply the dots to the outside of the star.
  7. On the top and the bottom of the handle, use SG-402 White and SG-406 Yellow to apply dots.
  8. Once dry, apply 2 coats of S-2101 Crystal Clear Brushing glaze to the exterior, including handle, using a CB-604 #4 Soft Fan brush.
  9. Stilt and fire to cone 06.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects