Watermelon Time

Add some fun to your next picnic with this watermelon set done in Foundations and Stroke & Coat.

Products Used

  • MB-890 11" Asian Flair Square Plate
  • MB-105 Rice Bowl
  • MB-131 Large Oval Platter
  • FN-001 White
  • FN-202 Medium Green
  • FN-225 Watermelon
  • FN-224 Key Lime
  • SC-15 Tuxedo
  • SC-26 Green Thumb
Decorating Accessories
  • BT-910 - Synthetic Sponges
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner
  • CB-604 #4 Soft Fan
Additional Materials
  • Pencil
  • Silk Decorating Sponge
  • Paper Towel
  • ½" Masking Tape
  • Download Project Pattern: Watermelon Pattern
Project Info


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 2 coats of FN-001 White to the top side of both plates and inside the bowl. Allow to dry.
  3. With AC-230 Clay Carbon Paper and a pencil, trace the watermelons on the MB-890 11” Asian Flair Square Plate.
  4. With the ½” masking tape, apply the masking tape along the straight edge of each watermen and on the rind area, also on the rind are of the MB-131 Large Oval Platter.
  5. Using a CB-604 #4 Soft Fan, apply 1 coat of FN-225 Watermelon to the watermelons on the Square Plate, the center of the oval Platter and inside of the bowl.
  6. Dampen a Silk Decorating Sponge in water, squeeze out the excess water and roll in-between paper towel to absorb any reaming moisture.
  7. Load the silk decorating sponge with FN-225 Watermelon and sponge 2 coats over the brushed on coat.
  8. Remove the masking tape when the last coat of FN-225 Watermelon looses it’s shine. Clean the edge of the bowl.
  9. Using a CB106 #6 Script Liner, apply 2 coats of FN-224 Key Lime to the rinds on the square plate, oval platter and edge of the bowl.
  10. Using a CB-110 #10/0 Liner, apply 2 coats of SC-26 Green Thumb to the edges around the rinds on the square plate.
  11. Using a CB-106 #6 Script Liner, loaded with SC-15 Tuxedo, apply a pressure stroke to create the watermelon seeds.
  12. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-020 Medium Green to the back of both plates and to the outside of the bowl. Allow to dry.
  13. Stilt and fire to shelf cone 06.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904


Technical Support