Cobalt-Olivine Combination


Products Used

  • SB-106 Rimmed Bowl
  • SW-127 Olivine
  • SW-305 Cobalt Wash
  • AC-302 Wax Resist
  • AC-525 Brush Cleaner
Decorating Accessories
  • CB-604 #4 Soft Fan
  • R2735-¾" Royal Aqualon Wisp
  • BT-910 Synthetic Sponge
Project Info
  • Designer: Nathan Klein
  • Skill Level: Basic
  • Time: 1 hour


  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 2 coats of SW-305 Cobalt Wash to the inside of SB-106 Rimmed Bowl.
  3. Condition a R2735-¾" Royal Aqualon Wisp Brush by: dampen the brush in water and squeeze out any excess water. Load the brush with AC-525 Brush Cleaner then squeeze between a paper towel.
  4. Apply 1 coat AC-302 Wax Resist to the inside rim of bowl.
  5. Using a CB-604 #4 Soft Fan, apply 3 coats SW-127 Olivine to the inside and outside of bowl.
  6. With a damp sponge, wipe off any excess glaze off the foot and bottom of the bowl.
  7. Place on a high-fired kiln washed kiln shelf.
  8. Do Not Stilt and make sure the bowl is not hanging over the kiln shelf.
  9. Fire to shelf cone 5/6.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support