Purple Chevron Set


Products Used

  • SB-104 Rimmed Salad Plate
  • SB-105 Rimmed Dinner Plate
  • SB-106 Rimmed Bowl
  • SB-116 Flared Mug
  • SW-125 Purple Mint
  • SW-302 Rutile Wash

Decorating Accessories

  • AC-310 Silkscreen Medium
  • BT-910 Synthetic Sponge
  • CB-604 #4 Soft Fan
  • DSS-0104 Chevron

Additional Materials



wp001 purple chevron sb
Designer: Marcia Roullard




  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. On a palette with a palette knife, mix SW-302 Rutile Wash with AC-310 Silkscreen Medium to the consistency of peanut butter.
  3. Using the small chevron from DSS-0104 Chevron, align the screen, shiny side up. With a squeegee, rub the thickened SW-302 Rutile Wash through the screen. Repeat process until desired surfaces are covered. 
    • Note: It will be necessary to rinse and dry the screen in-between usage. Refer to the Silkscreen Instructions for more information.
  4. For the interior of the SB-106 Rimmed Bowl, screen in sections. Tape off a section, screen, and continue around the bowl. 
  5. The SB-105 Rimmed Dinner Plate was taped off in 4 sections (pie sliced), screening in sections.
  6. Once screenprint is dry, use CB-604 #4 Soft Fan, apply 3 coats of SW-125 Purple Mint to the screened areas. Be sure to change direction of the brush strokes as they will show. 
  7. Using CB-604 #4 Soft Fan, apply 2 coats of SW-125 Purple Mint to all bare bisque areas, avoiding the feet/base of the pieces. 
  8. Wipe away any excess glaze from the feet/base of each bisque peice.
  9. Fire to cone 6.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904


Technical Support