Stoneware Combo with Flux - Bowl


Products Used

  • SB-104 Modern Bowl
  • SW-144 Lava Rock, SW-401 Mayco Flux

Decorating Accessories

  • CB-604 #4 Soft Fan

Miscellaneous Accessories

  • BT-910 Synthetic Sponge


Potclays SW Bowl Project Web
Designer: Todd Hickerson


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using CB-604 #4 Soft Fan, apply 3 coats of SW-144 Lava Rock to the interior and exterior of the bowl remitting the foot of the bisque. Be sure to allow coats to semi-dry prior to additional coats.
  3. Using CB-604 #4 Soft Fan, apply 3 coats of SW-401 Mayco Flux to the rim of the bowl, interior and exterior. Be sure to allow glaze to semi-dry between coats. Applying evenly and spatially around the rim, turn the brush vertically to apply strokes. *These strokes will encourage the glaze combo to assist flowing motion of Mayco Flux, as shown.
  4. With a damp sponge, wipe off any excess glaze off the foot of piece.
  5. Place on a high-fired kiln washed kiln shelf.
  6. Do not stilt and make sure the piece is not hanging over the kiln shelf, it must be fully supported.
  7. Fire to shelf cone 5/6.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support