Stoneware Plate with Stenciled Design


Products Used

  • SB-131 Rimmed Salad Plate
  • SG-401 Black Designer Liner, SC-76 Cara-Bein Blue, SW-211 Glacier Blue

Decorating Accessories

  • CB-604 #4 Soft Fan, CB-106 #6 Script Liner, SL-443 Tin Ceiling Designer Stencil

Miscellaneous Accessories

  • BT-910 Synthetic Sponge, 2" Foam Roller


Potclays SW Plate Project Web
Designer: Todd Hickerson


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Place SL-443 Tin Ceiling Designer Stencil in the center of the SB-131 Rimmed Salad Plate. Holding the stencil in place, use the Foam Roller to gently apply a small amount of SG-401 Black Designer Liner over top the stencil. Rolling the Foam Roller in various directions, lightly, will fill in the stencil without causing color to bleed into the design.
  3. Using CB-106 #6 Script Liner, apply 2 coats of SC-76 Cara-Bein Blue to the rim of the plate. Allow first coat to lose it's shine prior to applying 2nd coat.
  4. Using CB-604 #4 Soft Fan, apply 3 coats of SW-211 Glacier Blue over the entire plate. Be sure to allow coats to semi-dry prior to additional glaze coats.
  5. With a damp sponge, wipe off any excess glaze off the foot of piece.
  6. Place on a high-fired kiln-washed kiln shelf.
  7. Do not stilt and make sure piece is not hanging over the kiln shelf.
  8. Fire to shelf cone 5/6.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support