Green Tea/Wrought Iron Combo

 

 
Products Used

Bisque
  • SB-101 9" Pie Plate
Color
  • SW-108 Green Tea
  • SW-111 Wrought Iron
  • SW-202 Pistachio
  • SW-304 Copper Wash
Decorating Accessories
  • RB-144 #4 Soft Fan
  • BT-910 Synthetic Sponges
Stoneware Pie Plate
 
Project Info
  • Designer: Marcia Roullard
 

Instructions

 

 

  1. Begin with properly fired shelf cone 04 stoneware bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Dot the inside edge about 1 inch apart with SW-304 Copper Wash, use the handle of a brush.
  3. Using a RB-144 #4 Soft Fan, apply 3 coats of SW-111 Wrought Iron to the entire piece, but not the bottom.
  4. Using a RB-144 #4 Soft Fan, apply 3 coats of SW-108 Green Tea to the flat edge of the pie plate.
  5. Using a RB-144 #4 Soft Fan, apply 3 coats of SW-202 Pistachio to the inside of the pie plate, leaving a small edge of the Wrought Iron showing between the SW-108 Green Tea.
  6. Make sure all the glaze is removed from the bottom. Use a damp sponge.
  7. Fire to shelf cone 6.  Note: Medium speed on a shelf that has been coated with kiln wash. Make sure to use a shelf cone to check firing temp.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers

Distributors

PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

info@maycocolors.com

Technical Support

614-675-2031

technical@maycocolors.com

custom-css-security