Magic Lace

Nifty appeal of the rusted steel on the green acrylic paint..

Products Used

  • MB-101 - Coupe Salad Plate 7¾"
  • MM-106 - Steel Metallic
  • MM-305 - Rapid Rust
  • SS-376 - Limeburst
Decorating Accessories
  • AB-834 - ¾" Acrylic Base Coat
  • BT-910 - Synthetic Sponges
  • MM-502 - Matte Sealer
  • MM-600 - Spritzer Cap
Additional Materials
  • Flat Black Spray Paint
  • Window Lace
  • Paper Towels
Project Info


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Spray paint the entire plate with a flat black spray paint. It is important that a non-water based spray paint is used, otherwise the paint will lift off the plate. Allow to dry.
  3. Using a AB-834 ¾" Base Coat brush, apply 1 coat of SS-376 Limeburst over the front of the plate. Allow to dry.
  4. Apply a second coat of SS-376 Limeburst, then press in the flat side of the lace into the wet color. Brush back over the lace with the AB-834 ¾" Base Coat brush with the SS-176 Limeburst. Pat up any excess color with some paper towel.
  5. When dry to the touch, using a AB-902 #2 Stiff Fan brush, apply 2 coats of MM-106 Steel Metallic. Let the first coat dry somewhat. Spritz a liberal amount MM-305 Rapid Rust on then pull off the lace. The MM-106 Steel Metallic should dry to a nice rusty finish.
  6. Optional: Seal with 2 coats of AC-502 Matte Brush-on Sealer.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support