Large Faceted Tree (E)


Products Used

  • CD-004 14" Faceted Tree and Base
  • CG-750 Noel
  • FN-004 Red
  • SG-405 Green
  • SG-409 Bright Green

Decorating Accessories

  • CB-604 #E4 Soft Fan

Miscellaneous Accessories

  • Light Socket
  • Cord
  • X-ACTO Knife
  • Nipple (Small Threaded Rod)
  • LED 40-Watt Tube Bulb
  • Plastic Bulbs


faceted tree mold fired painted lights
Designer: Marcia Roullard


  1. Pour mold, drill holes for lights while leather hard, clean and fire to cone 04.
  2. Use an Exacto knife to drill a hole for the nipple in the base.
  3. Outline the facets of the tree with SG-405 Green, let dry, brush on 2- 3 coats of CG-750 Noel, clean out the glaze from the holes. Use CB-604 Soft Fan.
  4. Using the fan brush, brush on three coats of FN-004 Red to the base, let dry.
  5. Outline with SG-409 Bright Green.
  6. Brush the base with one coat of S-2101 Clear with the fan brush.
  7. Fire to cone 06. Glue in the bulbs, wire the base.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support