Spot On Doodle Vase

 

Products Used

Bisque
  • MB-1396 Spot On Pocket 
Color
  • FN-53 Mint
  • SC-15 Tuxedo
  • SC-18 Rosey Posey
  • SC-27 Sour Apple
  • SC-33 Fruit of the Vine
  • SC-73 Candy Apple Red
  • SC-78 Lime Light
  • SG-401 Black Designer Liner
  • S-2101 Crystal Clear Brushing Glaze

Decorating Accessories

  • AC-219 Designer Bottle with Writer Tip
  • SL-432 Curlicues Stencil
  • CB-604 #4 Soft Fan

Miscellaneous Accessories

  • Pencil
  • AC-230 Clay Carbon Paper
  • BT-910 Synthetic Sponge
  • Pattern: Spot on Doodle
PC Spot On Doodle
Designer: Laura Fraedrich
 
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using the CB-604 Soft Fan brush, apply 3 coats of FN-53 Mint to the back and the sides of the MB-1396 Spot On Pocket.
  3. Using the same brush, apply one watery coat of SC-73 Candy Apple Red to the center 2 inches of the front of the vase, applying in a circular direction.
  4. While still wet, use the CB-603 Soft Fan to apply one watery coat of SC-18 Rosey Posey next to the Candy Apple Red, radiating out about 2 inches towards the edge of the vase in a circular direction. Blend SC-18 Rosey Posey into the Candy Apple Red.
  5. While the Rosey Posey is still wet, apply one watery coat of SC-33 Fruit of the Vine to the outer two inches of the vase in a circular direction using the CB-604 Soft Fan Brush. Blend into the Rosey Posey. Let dry.
  6. Using the AC-230 Clay Carbon Paper and a pencil trace the pattern onto the vase.
  7. Use the SG-401 Black Designer Liner to go over the lines made by the carbon paper.
  8. Line up the SL-432 Curlicues Stencil with the paisley shapes in the design. Load a section of the BT-910 Synthetic Sponge with SC-27 Sour Apple and using an up and down dabbing motion, sponge the glaze through the entire stencil.
  9. Fill a clean AC-219 Designer Bottle with Writer Tip with SC-73 Candy Apple Red. Fill in the 4 rows of circles that radiate from the center of the design.
  10. Fill a clean AC-219 Designer Bottle with Writer Tip with SC-18 Rosey Posey and fill in the circles around the edge of the vase.
  11. Fill a clean AC-219 Designer Bottle with Writer Tip with SC-33 Fruit of the Vine. Fill in the 4 rows of ovals that radiate out from the center of the vase.
  12. Fill a clean AC-219 Designer Bottle with Writer Tip with SC-78 Lime Light and make random dots in the different sections of the design.
  13. Load a section of the BT-910 Synthetic Sponge with SC-15 Tuxedo and using an up and down dabbing motion, sponge the glaze onto the outer edge of the front of the vase.
  14. Using the CB-604 Soft Fan Brush, apply two coats of S-2101 Crystal Clear Brushing Glaze to the front of the vase.
  15. Stilt and fire to shelf cone 06

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers

Distributors

PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

info@maycocolors.com

Technical Support

614-675-2031

technical@maycocolors.com

custom-css-security