Lacy Pebbles Dinnerware Set


Products Used

  • SB-104 Rimmed Salad Plate
  • SB-105 Rimmed Dinner Plate
  • SB-106 Rimmed Bowl
  • SB-108 Contemorary Mug
  • SB-110 Desert Bowl
  • SC-86 Old Lace
  • SW-126 Polished Pebbles
Decorating Accessories
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponge
  • AC-223 Large Writer Tip
Additional Materials
  • Pencil
  • Banding Wheel
Project Info
  • Designer: Marcia Roullard
  • Skill Level: Basic
  • Time: 1½ hours


  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Load the AC-223 Large Writer Tip with SW-126 Polished Pebbles.
  3. Use the writer tip to make fat lines approx. 1/8 inch apart on the banded edge of each piece.
  4. Using a CB-604 #4 Soft Fan, apply 3 coats of SC-86 Old Lace over the top of the plates adding some water to the brush to glaze smoothly.  Brush over the banded edge.
  5. Using a CB-604 #4 Soft Fan, apply 1 coat of SW-126 Polished Pebbles over the SC-86 Old Lace, use a banding wheel and brush a thicker spiral coat to the center, thinning out towards the edge.
  6. Using a CB-604 #4 Soft Fan, apply 3 coats of SW-126 Polished Pebbles to the backs of the plates or they can be brushed the same as the tops.
  7. With a damp sponge, wipe off any excess glaze off the foot of the plates, bowls and mug. Allow to dry.
  8. Place on a high-fired kiln washed kiln shelf.
  9. Do Not Stilt and make sure the plates and bowls are not hanging over the kiln shelf.
  10. Fire to shelf cone 5/6.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support