Designer Liner Flower Plate

 

Products Used

Bisque
  • SB-104 Rimmed Salad Plate
Color
  • SC-11 Blue Yonder
  • SC-27 Sour Apple
  • SW-002 Matte Clear
  • SW-206 Melon
  • SW-209 Charcoal
  • SW-303 Manganese Wash
  • SG-401 Black 

Decorating Accessories

  • BT-910 Synthetic Sponge
  • CB-106 #6 Script Liner
  • CB-604 #4 Soft Fan

 

 

wp129 DLFlowersPlate
Designer: Nathan Klein
 
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using SG-401 Black Designer Liner, sketch out the flower design on plate by starting with the center of each flower and adding petals.
  3. Using CB-106 #6 Script Liner, apply 2 coats of SC-27 Sour Apple to various petals.
  4. Using CB-106 #6 Script Liner, apply 2 coats of SC-11 Blue Yonder to various petals.
  5. Using CB-106 #6 Script Liner, apply 2 coats of SW-002 Matte Clear to various flowers. Note: SW-002 Matte Clear can be applied over the Stoke & Coat on the various petals.
  6. Using CB-106 #6 Script Liner, apply 2 coats of SW-206 Melon to various flowers. Note: SW-206 Melon can be applied over the Stoke & Coat on the various petals.
  7. Using CB-106 #6 Script Liner, apply 1 coat of SW-303 Manganese Wash to the rim of SB-104 Rimmed Salad Plate.
  8. Using CB-604 #4 Soft Fan, apply 3 coats of SW-209 Charcoal to the background and the back of the plate. Take care to not get any SW-209 Charcoal on the flowers.
  9. Wipe off any excess glaze from the foot of the plate with a damp sponge.
  10. Do not stilt or hang over the edge of the kiln shelf.
  11. Fire to cone 5/6.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers

Distributors

PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

info@maycocolors.com

Technical Support

614-675-2031

technical@maycocolors.com

custom-css-security