Wintergreen Combo Mug


Products Used

  • SB-116 Flared Mug
  • SW-135 Wintergreen, SW-111 Wrought Iron, SW-302 Rutile Wash, SC-74 Hot Tamale

Decorating Accessories

  • AC-224 Plastic Detailer Caps, AC-223 Large Writer Tip Kit, BT-910 Synthetic Sponge, CB-604 #4 Soft Fan



cp130 WintergreenComboMug
Designer: Nathan Klein


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Fill AC-223 Larger Writer Tip Kit bottle with SW-302 Rutile Wash. Using the writer tip, make 3 rows of loops on the shoulder of the mug.
  3. Attach AC-224 Plastic Detailer Cap to SC-74 Hot Tamale and apply dots on the inside of the Rutile Wash loops. Allow for glaze to completely dry.
  4. Using CB-604 #4 Soft Fan, apply 3 coats of SW-135 Wintergreen to the inside and outside of the mug. Allow for glaze to completely dry between each coat.
  5. Using CB-604 #4 Soft Fan, apply 2 coats of SW-111 Wrought Iron to the outside of the mug excluding the handle.
  6. With a damp sponge, clean off any excess glaze on the foot of the mug.
  7. Do not stilt or hang over the edge of the kiln shelf.
  8. Fire to cone 5/6.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support