Tooled Leather Stein


IMG 9416

Products Used

  • SB-133 Stein

  • SW-167 Sand and Sea

  • SW-174 Leather

  • SW-304 Copper Wash

  • SG-401 Designer Liner Black

Decorating Accessories

  • AC-230 Clay Carbon paper

  • CB-604 # 4 Soft Fan

  • CB-404 # 4 Pointed Round

Miscellaneous Accessories


Designer: Timothy McPherson


  1. Begin with a properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove dust.
  2. Using the AC-230 Clay Carbon paper, transfer the pattern onto the ware.
  3. Using the SG-401 Designer Liner Black, outline the entire design.
  4. Thin with some water the SW-304 Copper Wash.
  5. Using the CB-404 # 4 Pointed Round apply 1 coat of the thinned Copper Wash to the leaves and stem.
  6. Using the CB-404 # 4 Pointed Round apply 2 coats of SW-174 Leather to the bands and handle, and the frame around the design
  7. Using the CB-604 # 4 Soft Fan apply 2 coats of SW-167 Sand and Sea to the inside and remaining bisque areas, excluding the bottom.
  8. Using a damp sponge, remove any glaze from the bottom.
  9. Place onto a well kiln washed shelf and fire to shelf cone 5-6.

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers


PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

Technical Support