Evening Sunset Mug


Products Used

  • SB-103 Wavy Mug
  • SW-128 Cordovan
  • SW-131 Birch
Decorating Accessories
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponge
Project Info


  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 3 coats of SW-128 Cordovan to the inside and outside of the mug.  Brush in a circular pattern around the mug.
  3. Using a CB-604 #4 Soft Fan, apply 2 coats of SW-131 Birch to the outside of the mug and the handle of the mug, Again it is important that the glaze is brushed evenly around the mug in a circular direction.
  4. With a damp sponge, wipe off any excess glaze off the foot of the mug.
  5. Place on a high-fired kiln washed kiln shelf.
  6. Do Not Stilt and make sure the mug handle is not hanging over the kiln shelf.
  7. Fire to shelf cone 5/6.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects