Copper Jade - Green Tea Combo

 

 
Products Used

Bisque
  • SB-106 Rimmed Bowl
Color
  • SW-108 Green Tea
  • SW-130 Copper Jade
Decorating Accessories
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponges
Stoneware_Copper_Jade_Combo_Bowl
 
 
Additional Materials
  • Pencil
  • Paper Towel
  • Banding Wheel
 
Project Info
  • Designer: Marcia Roullard
  • Skill Level: Basic
  • Time: 1½ hours
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-106 #6 Script Liner, apply 3 coats of SW-108 Green Tea to the ribbed edge of the bowl.
  3. Condition a CB-110 #10 Liner by: dampen the brush in water and squeeze out any excess water. Load the brush with AC-525 Brush Cleaner then squeeze between a paper towel.
  4. Using a CB-110 #10/0 Liner, apply vertical lines close together on the banded edge with AC-302 Wax Resist.
  5. Using a CB-604 #4 Soft Fan, apply 3 coats of SW-130 Copper Jade to the entire bowl front and back.  If the glaze does not resist from the wax, brush over with some water. Allow to dry,
  6. Using a CB-604 #4 Soft Fan, apply on a heavy coat of SW-108 Green Tea to the inside of the bowl, and while it is wet, use the fan to spiral a coat from the center to the edge of the bowl, press down on the fan.  You should see the glaze in a spiral.  A banding wheel can be used for this step. Allow to dry.
  7. With a damp sponge, wipe off any excess glaze off the foot of the bowl.
  8. Place unstilted, on a high-fired, kiln washed kiln shelf.
  9. Fire to shelf cone 5/6.

Who We Are

Our purpose, history and policies

About Us Warranty & Freeze Policy

Site Map

Where To Buy

Looking for a ceramic studio, retailer or wholesaler?

Find a Location

Project Library

Step by Step Instructions from the Professionals at Mayco.

Project library

New Projects