Green Tea/Manganese Combo

 

 
Products Used

Bisque
  • SB-100 16 oz. Mug
  • SB-106 Rimmed Bowl
  • SB-105 Rimmed Dinner Plate
Color
  • SW-108 Green Tea
  • SW-303 Maganese Wash
Decorating Accessories
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponge
Green_Tea_Manganese_Combo
 
 
Additional Materials
  • Banding Wheel
 
Project Info
  • Designer: Nathan Klein
  • Skill Level: Basic
  • Time: 1½ hours
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 1 coat SW-303 Manganese Wash in a circular motion to the front of SB-106 Rimmed Bowl and SB-105 Rimmed Dinner Plate using a banding wheel.
  3. Using a CB-604 #4 Soft Fan, apply 1 coat of SW-303 Manganese Wash to the outside of SB-100 16oz. Mug with horizontal brush strokes. Leave a ½ inch border around the foot of the mug unglazed.
  4. Using a CB-604 #4 Soft Fan, apply 3 coats of SW-108 Green Tea to the front and back of SB-106 Rimmed Bowl and SB-105 Rimmed Dinner Plate in a circular motion using a banding wheel.
  5. Using a CB-604 #4 Soft Fan, apply 3 coats of SW-103 Green Tea to inside and outside of SB-100 16oz. Mug. The first coat on the outside of the mug can be brushed down to the foot. It is important to recede the subsequent coats an inch each time! If you do not recede the coats, the glaze will run onto the kiln shelf.
  6. With a damp sponge, wipe off any excess glaze off the foot of plate, bowl and mug.
  7. Place on a high-fired kiln washed kiln shelf.
  8. Do Not Stilt and make sure the pieces are not hanging over the kiln shelf.
  9. Fire to shelf cone 5/6.

 

 

Who We Are

Our purpose, history, and policies

About Us

Site Map

Warranty & Freeze Policy

Where To Buy

Find the best place to purchase Mayco products

Dealers & Retailers

Distributors

PYOP & Ceramic Studios 

Contact Us

 (614) 876-1171 |   (614) 876-9904

info@maycocolors.com

Technical Support

614-675-2031

technical@maycocolors.com

custom-css-security