Elements Fire Face Plaque
Designer: Carmen Allen
Instructions
- Begin with properly fired earthenware bisque.
- Wipe with a damp sponge to remove any dust.
- Apply 1 coats of UG-50 to the entire piece and wipe back with a sponge, leaving the underglaze in the details/texture.
- Once dry, use the fan to apply 2 coats of EL-132 Rust Red to the outside layer of flames. Do not be too precise about the edge of the color. You will want this to overlap a bit with the next to create a smooth transition.
- Use the fan to apply 3 coats of EL-133 Autumn to the next layer of flames. Again, do not be too precise about the edge of the color.
- Apply 2 coats of EL-107 Amber Ash to the face, overlapping with the edge of the Autumn.
- Repeat the previous step, but with EL-128 Wheat.
- Allow to dry completely.
- Stilt and fire to cone 06/05. Sample was fired to cone 06.
Supplies
Form
- 4014 Fire Face Plaque
- SLE01 White Low-Fire Casting Slip
Colors
- UG-50 Jet Black
- EL-107 Amber Ash
- EL-132 Rust Red
- EL-132 Autumn
- EL-128 Wheat
Decorating Accessories
- CB-106 #6 Script Liner
- CB-624 #4 Glaze Fan
Miscellaneous Supplies
Top
