Blue and White Melt Gloop Bowl

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.  
2. RB-144 #4 Soft Fan Brush apply 2 coats of SW152 Blue Splatterware to the inside of the bowl and allow to fully dry 
3. Once glaze is dry, turn bowl upside down on a banding wheel 
4. Fill Applicator bottles with Melt Gloop 
5. Starting near the rim of the bowl create a horizontal line of dots using SW424 Blue Melt Gloop, leaving roughly ¼” – ½” of space between the dots. 
6. Continue creating lines of dots in a domino like pattern on the outside of your bowl using SW424 Blue Melt Gloop 
7. Using SW420 White Melt Gloop layer a smaller dot of the White Melt Gloop on top of the Blue Melt Gloop starting with the first line near the rim.  
   1. Continue by adding additional dots of white to the second row of blue dots near the rim. 
   2. After this, skip a row of blue dots and apply a dot of white on top of the blue. Continue to skip a row as you work your way up the outside of the bowl. 
8. Fire to cone 6. 

Additional Adaptations & Tips  

• Melt Gloop will start to run down the piece if dots become too large. Keep dots roughly pea-sized to ensure they stay in place and do not run.