Aurora Galaxy Serving Bowl

Designer: Laura Fraedrich

Share

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using the CB-604 Soft Fan Brush, apply 3 coats of SW-140 Matte Black to the back side of the bowl, leaving the bottom and foot unglazed.
  3. Using the CB-604 Soft Fan Brush, apply 3 coats of SW-146 Aurora Green to the inside of the bowl. Make sure you have plenty of crystals in your coats. Let dry.
  4. Using the Soft Fan brush, apply 2 heavy coats of SW-210 Emerald to the upper rim of the inside of the bowl about 2 inches wide.
  5. Using the Soft Fan brush, apply 2 heavy coats of SW-250 White Opal right below the band of Emerald, about 2 inches wide.
  6. Using the Soft Fan Brush, apply 2 heavy coats of SW-123 Sapphire to the rest of the inside of the bowl.Wipe off any excess glaze from the foot of the teapot
  7. with a damp sponge.
  8. Do not stilt or hang over the edge of the kiln shelf.
  9. Fire to cone 5/6.

Supplies

Form

  • SB-119 9″ Serving Bowl

Colors

  • SW-140 Matte Black
  • SW-146 Aurora Green
  • SW-210 Emerald
  • SW-250 White Opal
  • SW-123 Sapphire

Decorating Accessories

  • CB-604 #4 Soft Fan

Miscellaneous Accessories

  • Sponge
Top