Begin with a properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove dust.
Brush the top of the plate with one coat of FN-001 White use RB-144 Soft Fan.
Arrange the screens from DSS-0158 Buggin’ Out on the plate, wet the glaze around the screen, press into the glaze the punched clouds. Press with a paper towel so they stick. There are 8 clouds on the plate.
Squeeze out SC-11 Blue Yonder, SC-16 Cotton Tail on a plate, use the foam roller to pick up the color then roll over 2/3rds of the plate, roll in different directions so the colors will mix without totally mixing together, roll 2-3 coats. Roll on SC-98 Slime Time to the remainder of the plate, overlap onto the blue.
Remove the paper clouds.
Roll SC-98 Slime Time onto the mug in a vertical direction, overlap the rolls for interest and to deepen the color.
Thicken SC-15 Tuxedo with AC-310 Silkscreen Medium using a palette knife to the consistency of peanut butter. Hold the screen with the shiny side down onto the plate or mug, rub the thickened Tuxedo over the screen with your finger. Remove and gently wash the screen to re-use.
Brush two coats of color as listed in materials, use RB-110 Liner or RB-106 Script Liner stay inside of the lines avoiding the screened lines. Darken the stamens and the body of the butterfly, spots and body of the ladybug with SC-15 Tuxedo.
Brush the inside and handle of the mug with three coats of SP-275 Speckled Orange A Peel, use RB-144 Soft Fan, and RB-106 Script Liner.
Refer to the picture for color placement.
Brush one coat of NTBR Clear over the top and body of the mug, two coats of clear to the back of the plate. or Dip in NT-CLR Clear Dipping Glaze.