Cinnabar and Honeycomb Todd Mug
Designer: Todd Hickerson
- Begin with properly fired cone 04 stoneware bisque. Moisten a sponge and wipe bisque to remove any dust.
- Use a fan brush to apply 3 coats of SW-119 Cinnabar to the entire mug, avoiding the bottom.
- Use a fan brush to apply 2 coats of SW-117 Honeycomb to the top 1/3 of the mug.
- Use a clean sponge to wipe any excess glaze off of the foot.
- Fire to cone 5/6. (Sample was fired to cone 6)
- SW-117 Honeycomb
- SW-119 Cinnabar