- Cover 6 paper plates with plastic wrap.
- Place one of each of the following colors onto a covered plate: SC006 Sunkissed, SC013 Graple, SC026 Green Thumb, SC074 Hot Tamale, SC075 Orange-A-Peel, SC076 Cara-bein Blue. Allow the colors to dry out. This may take some time.
- Once the colors are dry, break the colors up to create crumbles. Keeping each color separate.
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using a CB-604 #4 Soft Fan, apply 1 coat of FN009 Black to the top of the plate and 3 coats to the back of the plate. Allow to dry between each coat.
- Using the ¼” Masking Tape. Divide the top of the plate into six sections.
- Cover the sections of the plate not being worked on with paper to prevent the colors going onto each other.
- Using a CB604 #4 Soft Fan, dampen one section at a time with some water. When the shine is gone, apply a coat of FN009 Black. While the FN009 Black is still wet, sprinkle the SC006 Sunkissed onto that section of the plate, press lightly to help attach to the wet glaze.
- Repeat with the remaining colors creatin a color wheel.
- Remove the masking tape. Allow to dry!
- Stilt and Fire to Cone 06/05.
Additional Adaptations & Tips
- Make sure to shake the Stroke & Coats well.
- No Glaze needed over top of the Stroke & Coat Colors.
