Moth Plate – Elements Starter Palette

Designer: Bailie Benson

Share

Instructions

  1. Wipe bisque with a damp sponge to remove dust/dirt and allow to dry 
  2. Apply three coats of EL101 Oyster Shell to the whole plate and allow to dry until the shine is gone 
  3. Transfer the pattern to the plate by laying the pattern on the plate and pressing lightly to outline with a pen. Remove the pattern to see the indents left by the traced pattern.  
  4. Using the Mini liner brush, outline the pattern lines in AC302 Wax Resist. 
  5. Apply three coats EL 131 Turtle Shell to the main parts of the wings.  
  6. Apply three coats of EL133 Autumn to the antenna. 
  7. Apply three coats of EL128 Wheat to the body of the moth 
  8. Apply three coats of EL118 Blue Grotto to the spots and top of the wings 
  9. Apply three coats of EL129 Slate around the outside of the moth and moon.  
  10. Allow to dry, stilt, and fire to cone 06. 

Supplies

Form 

  • MB102 Coupe Dinner Plate

Colors

  • EL129 Slate 
  • EL101 Oyster Shell 
  • El133 Autumn 
  • El131 Turtle Shell 
  • El118 Blue Grotto 
  • EL128 Wheat 

Decorating Accessories

  • RB106 Script Liner Brish 
  • RB140 Soft Fan Brush 
  • CB 110 10/0 Mini Liner Brush 
  • CB202 Detail Liner Brush 
  • AC302 Wax Resist 

Miscellaneous Accessories

Similar Projects

Back to Low-Fire Projects
Top